Free Shipping on Orders over $99.99
Free Shipping on Orders over $99.99
Roll-line Pivot Pin in Titanium (each)
$30.00
Roll-line Pivot Pin in Titanium (each)
The Roll-line Pivot Pin in Titanium is an essential component for skaters seeking high performance and durability. Designed for use in skate frames “04” and “07” with titanium trucks, this pivot pin ensures exceptional strength and reliability. Made from high-quality titanium, it offers superior resistance to wear and tear, making it ideal for both competitive and recreational skaters.
This pivot pin is compatible with a variety of Roll-line skate frames, including Energy Titanium, Matrix Titanium, Killer Titanium, and EVO. Its lightweight construction does not compromise on strength, providing a perfect balance of performance and durability. The Roll-line Pivot Pin in Titanium features two flats machined into the neck, which fit a 6mm wrench for easy adjustment.
Upgrade your roller skates with the Roll-line Pivot Pin in Titanium to experience smoother and more precise movements, enhanced stability, and greater overall performance. Sold individually, this pivot pin is a reliable and cost-effective solution for maintaining and improving your skate setup.
Share on Social Media:
Overview
Roll-line Pivot Pin in Titanium (each)
The Roll-line Pivot Pin in Titanium represents the pinnacle of engineering and material excellence for roller skate components. Crafted from high-quality titanium, this pivot pin offers unparalleled strength, durability, and lightweight performance, making it an ideal choice for serious skaters who demand the best from their equipment.
Compatibility and Use
This titanium pivot pin is specifically designed for use in “04” and “07” skate frames with titanium trucks, ensuring a perfect fit and optimal functionality. It is compatible with the following Roll-line skate frames:
- Energy Titanium
- Matrix Titanium
- Killer Titanium
- EVO
Its compatibility with these high-performance frames makes the Roll-line Pivot Pin in Titanium a versatile and essential component for various skating disciplines, including figure skating, dance, and freestyle skating.
Superior Material and Construction
Titanium is renowned for its strength-to-weight ratio, offering the robustness of steel at a fraction of the weight. This makes the Roll-line Pivot Pin exceptionally durable and able to withstand the rigorous demands of competitive skating. The pivot pin’s lightweight nature contributes to overall skate performance by reducing the weight of the skate setup, allowing for quicker and more agile movements.
Enhanced Performance
The Roll-line Pivot Pin in Titanium enhances your skating experience by providing superior stability and control. The precision engineering ensures a secure and stable connection between the skate components, resulting in smoother transitions, more precise movements, and improved overall performance. Whether you are executing intricate figure skating maneuvers or high-speed turns, this pivot pin delivers the reliability and performance you need.
Easy Adjustment
Adjustment and maintenance are made easy with the Roll-line Pivot Pin in Titanium. It features two flats machined into the neck, which fit a 6mm wrench, allowing for precise and easy adjustments. This ensures that your skates remain in peak condition, providing consistent performance and reliability.
Why Choose Roll-line Pivot Pin in Titanium?
Roll-line is a trusted name in the skating industry, known for its commitment to quality and innovation. The Roll-line Pivot Pin in Titanium embodies this commitment, offering skaters a high-performance component that meets the highest standards of craftsmanship. By choosing Roll-line, you are investing in a product that is trusted by professional and recreational skaters worldwide.
Conclusion
Upgrade your roller skates with the Roll-line Pivot Pin in Titanium to experience enhanced performance, stability, and durability. This essential component is designed for a range of Roll-line skate frames, providing a perfect fit and superior functionality. Ensure your skates are always at their best with this high-quality pivot pin from Roll-line.
Product Specifications:
- Material: High-quality titanium
- Compatibility: Energy Titanium, Matrix Titanium, Killer Titanium, EVO
- Sold individually
Specifications
Features
Roll-line Pivot Pin in Titanium (each)
How to Adjust the Pivot Pin
The Pivot Pin should be fully seated into the bottom of the Pivot Pin Cup. There should be NO Side to Side (when twisting the Truck with your hands) or Up and Down movement of the Pivot Pin (when pushing straight down on the Truck over top of the Pivot Pin shank) in the Pivot Pin Cup.
Be sure to NOT run the Pivot Pin Out too far or lengthen it to where the Pivot Pin is pushing on the Pivot Pin Cup and excerting pressure on the Suspensions (Cushions) and therefore the King Pin, and actually changing the Angle of Action. This is not a good thing. The adjustment should be solid, but do not over-do-it.
Once the Pivot Pin is in the correct position, hold that position with the 7mm wrench. Use a 13mm Wrench and tighten the Pivot Pin Jam Nuts against the shoulder on the Truck. This needs to be as tight as is physically possible. Lay the Skate on its side and actually lean on it and put your body weight into the tightening. Remember to hold the Pivot Pin in the correct position with the 6mm wrench, as it will tend to rotate with the tightening of the Pivot Pin Jam Nut.
The Pivot Pin is a hardened Steel and therefore much stronger than the Aluminum Truck internal threads that holds the Pivot Pin. If the Pivot Pin is allowed to be loose (with the Pivot Pin Jam Nut not tightened), eventually the Pivot Pin will wallar out (or make open) the threads of the Aluminum Truck. At this point, no matter how tight you get the Pivot Pin Jam Nut, it will NOT stay tight and will loosen up, because of the openess of the threads in the Aluminum Truck. The way to correct this issue is to replace the Truck with Axle assembly and make sure the Pivot Pins are adjusted properly and the Pivot Pin Jam Nuts are kept VERY tight. Roll-Line recommends in their manual, that the Pivot Pins be checked once a week. I am sure there are Skaters that have never checked their Pivot Pin adjustments, much less are, checking them once a week.
Movement of the Pivot Pin in the Pivot Pin Cup will wear out or destroy the high quality Delrin, Pivot Pin Cup. If these get torn up, due to improperly adjusted Pivot Pins, it is recommended that the Pivot Pin Cups be changed.
The Pivot Pin and it’s proper adjustment is VERY Important to the performance of your Roll-Line Skate. So, keep them adjusted or have your Skates maintained by a qualified Skate Technician.
Brand Roll Line
Overview
Specifications
Features
Roll-line Pivot Pin in Titanium (each)
How to Adjust the Pivot Pin
The Pivot Pin should be fully seated into the bottom of the Pivot Pin Cup. There should be NO Side to Side (when twisting the Truck with your hands) or Up and Down movement of the Pivot Pin (when pushing straight down on the Truck over top of the Pivot Pin shank) in the Pivot Pin Cup.
Be sure to NOT run the Pivot Pin Out too far or lengthen it to where the Pivot Pin is pushing on the Pivot Pin Cup and excerting pressure on the Suspensions (Cushions) and therefore the King Pin, and actually changing the Angle of Action. This is not a good thing. The adjustment should be solid, but do not over-do-it.
Once the Pivot Pin is in the correct position, hold that position with the 7mm wrench. Use a 13mm Wrench and tighten the Pivot Pin Jam Nuts against the shoulder on the Truck. This needs to be as tight as is physically possible. Lay the Skate on its side and actually lean on it and put your body weight into the tightening. Remember to hold the Pivot Pin in the correct position with the 6mm wrench, as it will tend to rotate with the tightening of the Pivot Pin Jam Nut.
The Pivot Pin is a hardened Steel and therefore much stronger than the Aluminum Truck internal threads that holds the Pivot Pin. If the Pivot Pin is allowed to be loose (with the Pivot Pin Jam Nut not tightened), eventually the Pivot Pin will wallar out (or make open) the threads of the Aluminum Truck. At this point, no matter how tight you get the Pivot Pin Jam Nut, it will NOT stay tight and will loosen up, because of the openess of the threads in the Aluminum Truck. The way to correct this issue is to replace the Truck with Axle assembly and make sure the Pivot Pins are adjusted properly and the Pivot Pin Jam Nuts are kept VERY tight. Roll-Line recommends in their manual, that the Pivot Pins be checked once a week. I am sure there are Skaters that have never checked their Pivot Pin adjustments, much less are, checking them once a week.
Movement of the Pivot Pin in the Pivot Pin Cup will wear out or destroy the high quality Delrin, Pivot Pin Cup. If these get torn up, due to improperly adjusted Pivot Pins, it is recommended that the Pivot Pin Cups be changed.
The Pivot Pin and it’s proper adjustment is VERY Important to the performance of your Roll-Line Skate. So, keep them adjusted or have your Skates maintained by a qualified Skate Technician.
You may also like
-
SOLD OUT
Bont Crono 2 Inline Skate With Supercell Frame
$1,629.08Select Options This product has multiple variants. The options may be chosen on the product page -
Bont Vaypor Zipper Toebox Colors Inline Skate with Supercell Frame
$1,412.11Select options This product has multiple variants. The options may be chosen on the product page -
Riedell Siren Roller Derby Skate
$1,399.00Select options This product has multiple variants. The options may be chosen on the product page -
Bont Vaypor BOA Inline Skate with Supercell Frame
$1,392.78Select options This product has multiple variants. The options may be chosen on the product page
Hot Items
Related products
Roll-line Toe Stop Ambra Hockey Small
$35.00Select options
This product has multiple variants. The options may be chosen on the product page
