Free Shipping on Orders over $99.99
Free Shipping on Orders over $99.99
Roll-line Pivot Pin Jam Nut (each)
$10.00
Roll-line Pivot Pin Jam Nut (each)
The Roll-line Pivot Pin Jam Nut is a crucial component for maintaining the integrity and performance of your skate setup. Designed for use in skate frames “04” and “07” with steel or titanium trucks, this jam nut ensures that your pivot pins remain securely locked in place. Engineered from high-quality steel, it is built to withstand the rigorous demands of high-level competitive skating.
Compatible with a wide range of Roll-line skate frames, including Variant M, Blaster, Mariner Cup, Mistral, Energy Steel, Energy Titanium, Matrix Steel, Matrix Titanium, Killer Steel, Killer Titanium, EVO, Dance, Rafaello, Ring, Saturno, Giotto, and Spin, this jam nut offers versatility and reliability. Its 13mm wrench adjustment makes it easy to install and lock, providing skaters with peace of mind and enhanced performance on the rink.
Whether you are a competitive skater or a recreational enthusiast, the Roll-line Pivot Pin Jam Nut is an essential accessory for ensuring your skates function at their best. Upgrade your skate maintenance routine with this durable and reliable component from Roll-line.
Share on Social Media:
Overview
Roll-line Pivot Pin Jam Nut (each)
The Roll-line Pivot Pin Jam Nut is an essential component for skaters looking to maintain the optimal performance and safety of their roller skates. This high-quality jam nut is designed specifically for skate frames “04” and “07” with steel or titanium trucks, making it a versatile and reliable choice for a wide range of skating setups. Made from durable steel, this pivot pin jam nut is engineered to withstand the wear and tear of intense skating activities, ensuring your pivot pins remain securely locked in place.
Compatibility and Use
This pivot pin jam nut is compatible with a variety of Roll-line skate frames, offering skaters the flexibility to use it across multiple setups. It fits the following Roll-line skate frames:
- Variant M
- Blaster
- Mariner Cup
- Mistral
- Energy Steel
- Energy Titanium
- Matrix Steel
- Matrix Titanium
- Killer Steel
- Killer Titanium
- EVO
- Dance
- Rafaello
- Ring
- Saturno
- Giotto
- Spin
Superior Material and Construction
Constructed from high-grade steel, the Roll-line Pivot Pin Jam Nut is built to last. Its robust construction ensures that it can handle the demands of competitive skating, providing skaters with the confidence that their equipment will perform reliably under pressure. The steel material also offers excellent resistance to corrosion and wear, prolonging the lifespan of the jam nut and maintaining the integrity of your skate setup.
Enhanced Performance
A properly adjusted pivot pin is critical to the performance of your skates. The Roll-line Pivot Pin Jam Nut plays a vital role in locking the pivot pin into place, ensuring that your skates remain stable and responsive during use. This precise locking mechanism enhances your skating performance by providing a secure and stable connection between the skate components, allowing for smoother transitions and more precise movements.
Easy Adjustment
The Roll-line Pivot Pin Jam Nut is designed for ease of use, featuring a 13mm wrench adjustment for quick and accurate installation. This allows skaters to easily lock and adjust the pivot pin, ensuring their skates are always in peak condition. Whether you are performing complex figure skating maneuvers or high-speed turns, this jam nut provides the reliability and performance you need.
Why Choose Roll-line Pivot Pin Jam Nut?
Roll-line is a renowned brand in the skating industry, known for its commitment to quality and innovation. The Roll-line Pivot Pin Jam Nut embodies this commitment, offering skaters a high-performance component that meets the highest standards of craftsmanship. By choosing Roll-line, you are investing in a product that is trusted by professional and recreational skaters worldwide.
Conclusion
Enhance your roller skates with the Roll-line Pivot Pin Jam Nut to experience improved performance, stability, and durability. This essential component is designed for a range of Roll-line skate frames, providing a perfect fit and superior functionality. Ensure your skates are always at their best with this high-quality pivot pin jam nut from Roll-line.
Product Specifications:
- Material: High-grade steel
- Compatibility: Multiple Roll-line skate frames including “04” and “07” models
- Adjustment: 13mm wrench
- Sold individually
Specifications
Features
Roll-line Pivot Pin Jam Nut (each)
How to Adjust the Pivot Pin
The Pivot Pin should be fully seated into the bottom of the Pivot Pin Cup. There should be NO Side to Side (when twisting the Truck with your hands) or Up and Down movement of the Pivot Pin (when pushing straight down on the Truck over top of the Pivot Pin shank) in the Pivot Pin Cup.
Be sure to NOT run the Pivot Pin Out too far or lengthen it to where the Pivot Pin is pushing on the Pivot Pin Cup and excerting pressure on the Suspensions (Cushions) and therefore the King Pin, and actually changing the Angle of Action. This is not a good thing. The adjustment should be solid, but do not over-do-it.
Once the Pivot Pin is in the correct position, hold that position with the 7mm wrench. Use a 13mm Wrench and tighten the Pivot Pin Jam Nuts against the shoulder on the Truck. This needs to be as tight as is physically possible. Lay the Skate on its side and actually lean on it and put your body weight into the tightening. Remember to hold the Pivot Pin in the correct position with the 6mm wrench, as it will tend to rotate with the tightening of the Pivot Pin Jam Nut.
The Pivot Pin is a hardened Steel and therefore much stronger than the Aluminum Truck internal threads that holds the Pivot Pin. If the Pivot Pin is allowed to be loose (with the Pivot Pin Jam Nut not tightened), eventually the Pivot Pin will wallar out (or make open) the threads of the Aluminum Truck. At this point, no matter how tight you get the Pivot Pin Jam Nut, it will NOT stay tight and will loosen up, because of the openess of the threads in the Aluminum Truck. The way to correct this issue is to replace the Truck with Axle assembly and make sure the Pivot Pins are adjusted properly and the Pivot Pin Jam Nuts are kept VERY tight. Roll-Line recommends in their manual, that the Pivot Pins be checked once a week. I am sure there are Skaters that have never checked their Pivot Pin adjustments, much less are, checking them once a week.
Movement of the Pivot Pin in the Pivot Pin Cup will wear out or destroy the high quality Delrin, Pivot Pin Cup. If these get torn up, due to improperly adjusted Pivot Pins, it is recommended that the Pivot Pin Cups be changed.
The Pivot Pin and it’s proper adjustment is VERY Important to the performance of your Roll-Line Skate. So, keep them adjusted or have your Skates maintained by a qualified Skate Technician.
Brand Roll Line
Overview
Specifications
Features
Roll-line Pivot Pin Jam Nut (each)
How to Adjust the Pivot Pin
The Pivot Pin should be fully seated into the bottom of the Pivot Pin Cup. There should be NO Side to Side (when twisting the Truck with your hands) or Up and Down movement of the Pivot Pin (when pushing straight down on the Truck over top of the Pivot Pin shank) in the Pivot Pin Cup.
Be sure to NOT run the Pivot Pin Out too far or lengthen it to where the Pivot Pin is pushing on the Pivot Pin Cup and excerting pressure on the Suspensions (Cushions) and therefore the King Pin, and actually changing the Angle of Action. This is not a good thing. The adjustment should be solid, but do not over-do-it.
Once the Pivot Pin is in the correct position, hold that position with the 7mm wrench. Use a 13mm Wrench and tighten the Pivot Pin Jam Nuts against the shoulder on the Truck. This needs to be as tight as is physically possible. Lay the Skate on its side and actually lean on it and put your body weight into the tightening. Remember to hold the Pivot Pin in the correct position with the 6mm wrench, as it will tend to rotate with the tightening of the Pivot Pin Jam Nut.
The Pivot Pin is a hardened Steel and therefore much stronger than the Aluminum Truck internal threads that holds the Pivot Pin. If the Pivot Pin is allowed to be loose (with the Pivot Pin Jam Nut not tightened), eventually the Pivot Pin will wallar out (or make open) the threads of the Aluminum Truck. At this point, no matter how tight you get the Pivot Pin Jam Nut, it will NOT stay tight and will loosen up, because of the openess of the threads in the Aluminum Truck. The way to correct this issue is to replace the Truck with Axle assembly and make sure the Pivot Pins are adjusted properly and the Pivot Pin Jam Nuts are kept VERY tight. Roll-Line recommends in their manual, that the Pivot Pins be checked once a week. I am sure there are Skaters that have never checked their Pivot Pin adjustments, much less are, checking them once a week.
Movement of the Pivot Pin in the Pivot Pin Cup will wear out or destroy the high quality Delrin, Pivot Pin Cup. If these get torn up, due to improperly adjusted Pivot Pins, it is recommended that the Pivot Pin Cups be changed.
The Pivot Pin and it’s proper adjustment is VERY Important to the performance of your Roll-Line Skate. So, keep them adjusted or have your Skates maintained by a qualified Skate Technician.
You may also like
-
SOLD OUT
Bont Crono 2 Inline Skate With Supercell Frame
$1,629.08Select Options This product has multiple variants. The options may be chosen on the product page -
Bont Vaypor Zipper Toebox Colors Inline Skate with Supercell Frame
$1,412.11Select options This product has multiple variants. The options may be chosen on the product page -
Riedell Siren Roller Derby Skate
$1,399.00Select options This product has multiple variants. The options may be chosen on the product page -
Bont Vaypor BOA Inline Skate with Supercell Frame
$1,392.78Select options This product has multiple variants. The options may be chosen on the product page
Hot Items
Related products
Roll-line Toe Stop Standard
$30.00Select options
This product has multiple variants. The options may be chosen on the product page
Roll-line Toe Stop Super Professional/ Ambra
$35.00Select options
This product has multiple variants. The options may be chosen on the product page
Roll-line Giotto 63MM Artistic Roller Skate Wheels
$85.00Select options
This product has multiple variants. The options may be chosen on the product page
