Roll line plate Energy with Titanium Axles

Roll Line Energy Titanium Plate:

The Roll-Line Energy Titanium is the Skate, the Best Skaters in the World will on it.

The Energy provides the best possible performance due to its innovative design and ultra lightweight structure.
The Roll-Line Energy is forged from a solid bar of Ergal Aluminum Alloy and completely CNC machined. Ergal is one of the Strongest and Lightest Aluminum Alloys available and has a lower expansion coefficient and offers the best coiled-spring response.
The Roll-LineClick Action adjustment system provides optimum, accurate, and consistent Action adjustments using the 04 series, 13mm base King Pins with Adjustment Click-Nuts and Locking Screws.

The Energy Titanium features the strongest and lightest Titanium Alloy Axles in trucks with adjustable Pivot Pins. The design and materials of Roll-Line Skates provides athletes the proper support of the skating shoe and give the most sensitive control, the greatest and absolute fastest response available from any skate, providing a sense of great stability and action.

Roll-Line Urethane Suspensions provide incredibly quick and fluid energy transmission from the foot through the skate to the skating surface.
The Roll-Line Urethane Suspensions are available in five hardnesses to provide the perfect skate alignment. The Upper (Large) Suspension provides the Stability of the Edge, while the Lower (Small) Suspension creates the Deep Edges, Great Turns and Spins.
The Suspensions can be mixed and matched to provide a VERY Custom skate Action. Usually the Upper (Large) Suspension is harder, because it is carrying the weight of the Skater, and provides the edge stability, while the Lower (Small) Suspension is one or (more infrequently) two levels more flexible, providing great edges and changes.

Sometimes for FreeStyle Skating, the lower cushion is one level stiffer to support the stability of landing major jumps

Roll Line Energy Titanium Plate:

Advice for optimal Position adjustment

Since the Energy Titanium frame is a product constructed exclusivelyfor professional use, it guarantees the best performance onlywhen correctly adjusted.
An optimal position is achieved by carefullychoosing the most Appropriate suspensions in relation to the type of skatingand the weight of the athlete.

CHART OF THE SUSPENSION HARDNESSES

Urethane suspension hardness
Green Extra soft - up to 35 kg
Grey Soft - up to 45 kg
Clear blue Medium - up to 55 kg
Clear Medium/hard - up to 70 kg
Clear yellow Hard - >70 kg

It is important to remember that since these are extremelysensitive Elastomer suspensions, even the smallest rotation of theadjustment nut can cause a modification in the adjustment of the action.

CLICK ACTION ADJUSTMENT

Turn the action adjustment nut with the 17 mm wrench in the clockwise direction to make the action more rigid, or in thecounter clockwise direction to make it softer.
It is important to check that the pivot is well insertedinto the pivot bush while exerting slight pressure.
Adjustment Nut locking screw is only a safe screw, remove itonly when you change the suspensions.

PIVOT ADJUSTMENT

Loosen the pivot locking screw with a 13 mm wrench.
Screw the pivot on or off with a 6 mm wrench until this iswell inserted into the pivot bush while exerting slight pressure.Retighten the pivot locking screw.

CONTROL AND MAINTENANCE

We recommend that you check the status of the variouscomponents every time this product is used. In particular, carefully checkthe following:

- that the plate is well fastened to the boot;

- that the bolts are well fastened to the plate of theskate;

- the wear and tear status of the suspensions;

- that the pivot is well inserted into the pivot bush withslight pressure;

- the wear and tear status of the wheels and theself-locking nuts for fastening the wheels;

- the optimal gliding of the bearings;

- the wear and tear status, correct position, proper closureand the cleanliness of the toe stop feature.